Tip: If you are using a 3G/4G USB modem with a SIM/UIM card, plug the USB modem into the 3G/4G USB port to transfer the 3G/4G signal to Wi-Fi. 2.4G: TP-Link_XXXX 5G: TP-Link_XXXX_5G SSID XXXXXXXX Wireless Password /PIN 2. Connect your device to the router’s Wi-Fi. The default SSID (network name) and
Like other desktop routers, the ZTE MF286 has four Gigabit Ethernet ports, a USB 2.0 port for connecting a USB drive and file sharing, as well as an analog telephone line connector. Of course, there is also a built-in modem and a slot for mini SIM cards, under the plugs, two SMA connectors for the external LTE antenna.Account Settings. To configure the account settings for your modem, from Fireware Web UI or Policy Manager: Select Network > Modem. Make sure that the Enable Modem check box is selected. From the Modem Type drop-down list, select the type of modem to configure. 4G LTE and 5G. USB.Password manually option and enter the 3G/4G parameters provided by your internet service provider (ISP). 6. Follow the step-by-step instructions of the Quick Setup to complete the configuration. > Refer to Plug and Play via 3G/4G USB Modem to share the internet through a 3G/4G USB modem. > Refer to Connect to DSL/Cable/Satellite Modem to share theSETUP EASY SETUP: 3G/4G CONNECTION MODE INSTALL THE 3G/4G USB ADAPTER Plug the 3G/4G USB modem into the USB port of the DWR-116. CONNECT TO THE DWR-116 Plug one end of the Ethernet cable into the DWR-116. Plug the other end of the cable into your PC's Ethernet port. You may also connect to the router wirelessly. CONFIGURE THE DWR-116There’s also a USB 3.0 port which can be used for an external storage drive or connect a 4G USB modem for backup internet connectivity. Initial Setup. The quick setup guide included with the DSL-X1852E was quite detailed and would help a novice user to get things going easily.
Use the setup instructions on next page. Put your router to work: • Your Fios Router is your gateway to all Fios services. • Simple to set up and easy
Oops It seems like this page is out of context (no product is linked to it). No worries though! You simply need to select your Ewon device in the list below:Using the Setup Wizard The Setup Wizard and Device Manager are supported on Microsoft Internet Explorer 6.0 or later, Mozilla Fi refox 3.0 or later, and Apple Safari 3.0 or later. To configure the firewall by using the Setup Wizard: Step1 Power on the PC that you connected to the LAN1 port in Step 3 of the Connecting the Equipment section.zjXm.
